5 public posts in this discussion.
Since I finally upgraded to Socket 370 I also took the liberty of upgrading my sisters system which was also a Socket 7 which I owned previously.
It supports Intel Pentium, Cyrix 6X86, AMD5k86, AMD K5 processors at bus speeds of 50mz-66mz but possibly 75mz. It uses 72pin EDO RAM and takes AT power supply. It has 4 ram slots, 3 PCI slots and 4 ISA Slots.
Comes extra with:
-4 16MB EDO RAM sticks (64MB RAM)
-Socket 7 Intel Pentium 100mz
Make a offer!
Just so anyone knows it is an AT board.
What kind of multipliers does it support? IE what is the highest type of processor that it will take?
I'm interested, partially because of the four RAM slots. Typically, mobo's with high numbers of RAM slots are high quality.
All the Cpu's used on this board are Socket 7 and the maximum bus speed that I know you can obtain is 233mz at 66mz multipliers of 1.5, 2, 2.5 and 3 for processors such as the Pentium, Pentium MMX, AMD K5 or K6 and Cyrix 586 or 686 processors. As for higher speeds than 66mz bus you would be looking for a Super 7 series.
The ram used is the rarelly obtainable 72pin EDO ram and I also have a Pentium 100 if you don't have a cpu. This is ideal for older systems.
:D Been sold to Billy from Bits n bytes palmo!