Im not sure but it seems to be possible (going by the software supplied) to plug the antenna into the card and be able to change channel on the comp, not by going through a tv?
Has anyone got this to work?
TV on GF4 4200
5 public posts in this discussion.
Post 2
Which model of GF4 is that, also are you sure that's not the TV-Out
Post 3
If the Antenna to the built-in tuner doesn't work, check the driver updates (on the news frontpage). It might also be handy to check that the Tuner is set to Australia PAL-W (I forgot which PAL it is).
Post 4
I can get composit TV, where the antenna goes into the TV and then vido out goes to my comp.
But; I want to split the antenna signal although there isnt an antenna in port for the card. I was wondering if it could auto detect the differance between the antenna signal and vidio signal so i could get an adapter for the VIDIO in and put the antenna in instead. But im worried about the voltages and unusual signal if the card isnt designd for it it may fry.
So im wondering 1st if its possible for pixelview GF4 4200 to accept antenna info. Second is if anyone has done this.
Post 5
Most likely not unfortunately Matt...You usually need and attenna card or tv tuner card which you can watch tv on. Vid in signals are diff to antenna signals i believe. Though im no genuis....send it out to those who got over 130 in the iq test...hahaha.