I need someone to do me a favour...

10 public posts in this discussion.

Post 1

Ok, my mobo is the GA-6BXE http://tw.giga-byte.com/products/ga6bxe.htm. It's all I got for now :( and it was Timmy's. I need someone to do me a huge favour and tell me what it can max support, and if I need to flash BIOS. I only ask this because I don't usually post, and don't have direct access to da net. ;)

Thanks heaps gamers.

Azreal

Post 2

GA-6BXE
Intel 440BX AGPset

PROCESSOR

Slot 1 Socket for future Processor support
66/75*/83*/100/112*/124*/133* MHz Main Clock
Auto Detect CPU Voltage
Clock multiplier 3.0/3.5 ...... / 5.5

CHIPSET
Intel 82440 BX AGPset
iTE 8671 I/Oset (1Mb/S)
Winbond 83782 Health Chip

CACHE MEMORY
CPU Built-in 256KB/512KB L2 cache System Memory
4 x 100MHz 168-pin 3.3v DIMM sockets support
Supports 8/16/32/64/128/256 MB DIMM Module
Supports EDO RAM, SDRAM (Support ECC, 72 bit)
Supports 8MB to 1GB DRAM Size

PCI IDE
2 X PCI Bus Master UDMA/33 IDE ports (up to 4 ATAPI Devices)
Supports for PIO Mode 3, 4, UDMA/33 IDE & ATAPI CD-ROM

I/O INTERFACE
1x floppy port (360KB-2.88MB)
2x serial ports (16550 high-speed)
1x parallel port (EPP/ECP)
PS/2 Keyboard
PS/2 Mouse
2x USB

EXPANSION SLOTS
5 x PCI 32-bit slots, PCI 2.2 compliant
2 x ISA 16-bit slots
1 x AGP (1x & 2x Mode,66/133MHz) slot

POWER
ATX Power connector
Power On by Keyboard, PS/2 Mouse, LAN, RTC Alarm,
Modem Ring & Switch
Power Off by WindowsR 98 Shut down & Soft-Power Switch
AC Recovery On/Off Control by BIOS
Stop CPU Fan during entering suspend mode
3 Level ACPI LED Support

FORM FACTOR
ATX , 4 layer PCB (31.0*19.2cm)

PROTECTION
Flexible Temperature Sensor Under Processor Heatsink
Auto Speed Down and Speaker Alarm when CPU overheat(OS independent & Driverless)
ystem Health Status Detect & Report by BIOS, LDCMR & SIV
Hardware Detects +/- 5v, +/-12v, CPU & CMOS battery Voltage Status

BIOS
2 Mbit (256KB) FLASH RAM
Award BIOS with Enhanced ACPI Feature for PC98/Win98
Compliance, Green,PnP, DMI, INT13 (>8.4GB) & Anti-Virus functions
IDE#1~#4, SCSI, LS120, ZIP & CD-ROM bootable
AC Recovery ON/OFF Control function
Auto-detect & Report System Health Status

OTHER FEATURES
Supports Wake On LAN Header (WOL)
Supports Creative SB-LINK connector for Sound Blaster AWE64D PCI Sound
Supports 3 Fan Detection Connectors
Poly fuse for keyboard overcurrent protection
Case Open Detection

DRIVER
Intel LDCMR, SIV utility
Ultr DMA/33 Bus Master IDE Driver (Triones & Intel)
Intel PIIX4e Patch Utility for Windows 95

PERFORMANCE
Processor Intel Pentium®II
300(100x3) MHz 350(100x3.5)MHz
Winbench 98
CPU mark32 795 952
FPU Winmark 1560 1850
Business Disk 1670 1780
Hi-End Disk 3300 3620
Business Graphic 165 188
Hi-End Graphic 183 214
Winstone 98
Business 29.8 33.8
Hi-End 31.2 35.3

*There speed settings are not guaranteed by GIGABYTE.
The specifiction and pictures are subject to change without notice.
All trademarks and logos are the properties of their respective holders.

Post 3

Uhhh, dude. Thanks for that, but I'm not too clued up on multiplier's and shit...what exactly can this motherboard support up to? I mean, can I put a 1.2 PIII Tulatin in it or what?

-Az

Post 4

733mhz I think.. Either that or 700mhz..

-MortaR-
The Forgotten Poster

Post 5

And thats depends on what REV version the board is. Do you know what version it is? :roll:

Post 6

What the fuck is that???

Post 7

nice sig
Impresses Eater... (not the pic the words)

Post 8

azreal if you dont pay me for that mobo soon im ganna get angry, and when i get angry... i do stuff that angry people do... like eat alot and sutff, but that besides to point, pay me soon or i eat alot!

Post 9

Quote from Azreal:
Uhhh, dude. Thanks for that, but I'm not too clued up on multiplier's and shit...what exactly can this motherboard support up to? I mean, can I put a 1.2 PIII Tulatin in it or what?

-Az

No, a tualatin requires an i815EP or some via chipsets, as it reuires b-stepping rather than the nromal way the i815 does things. The highest you'll get would be a P2 i would say. However you might get one of the pre-coppermine celerons in it (mendichino core).

if you want to run a P3 or Celeron Tualatin, you will need a GA-6OXT (full ATX) or the GA-6VEML (micro ATX). Or another brand board that has the i815EP chipset or the VIA VT8602 (PLE133T)/VIA VT82C686B chipset combo. However there are a few more combos for via chipsets

Post 10

Ok first - to Eater - thanks. I show you some of my own shit soon - I write some pretty decent pomes. I don't trip in to the big fuckin picture sig's, although some look aii. To Martok - thanks mate, much appreciated.