Dual Processor Athlon 2600+.

21 public posts in this discussion.

Post 1

This is the system I am considering buying:

Motherboard: Thunderk7xPro
Processors: Athlon XP 2600+ x2

A few questions, however:

1. Will this motherboard/processor configuration sit in my current ATX case? It currently holds an Intel Celeron processor, and rather then buy a new case/power supply I'd rather just stick it in my current system. Also, I'll be keeping my current RAM.

2. AGP Slot Pro? Oro? Will this take my Radeon 9100?

EDIT: Turns out it will.

3. My power supply is 350w. Will this provide enough juice for this system?

4. Anything else at all which could cause a problem?

Post 2

that motherboard is designed for dual processors.....Athlon XP do not dual. Athlon MP do. and they are very expencive and would really be useless for anything except heavy server work. which unless you run an oracle data base your probably not going to use :P

Post 3

and the AGP slot has to have a card that has a registration tab....one i dont think the 9100 has. only specialised cards do. :)

Post 4

Is it really worth getting the dual processors for gaming purposes?

The website mentions that the Radeon 8500 (same as 9100) is supported by the board... so I dunno what that's about.

Post 5

AGP pro slots work for both agp pro cards and normal, check out the size of the AGP slot on the soltek sl 75 drv4 :P

And dual proc systems are only good for one game... Quake 3 :P

Post 6

Quote from Wolfspirit:
Is it really worth getting the dual processors for gaming purposes?

Not unless you want to run CS with BF1942, Quake3 and warcraft 3 in the background

Post 7

Quote from stealthninja:
[quote:0996bf6dad="Wolfspirit"]Is it really worth getting the dual processors for gaming purposes?

Not unless you want to run CS with BF1942, Quake3 and warcraft 3 in the background[/quote:0996bf6dad]

But I wanna do that!

No, seriously. I changed my order. I think I'm happier with this (costs far less for one; more hard drives, yay!) and it means I can order from Gamedude, which I'm happier doing since I've ordered through them and I like their system. So, order is changed to:

Motherboard: Socket A JETWAY POLARIS 400 KT400, which can do a bazillion and one things.
Quote from Gamedude:

Support Socket-A for AMD Athlon /Duron TM uni-processor at 266/333MHz Front Side Bus with double data rate VIA Apollo KT400 System controller and VT82335 High Bandwidth Vlink Client South Bridge Support 2 Serial ATA Port & 1 Parallel ATA 133 Port, Support USB 2.0, Support IEEE 1394a Port, Onboard LAN, Support 6-Channel Speaker, Extend AGP Slot Support 8X AGP
Support 2.5V DDR266/DDR333/DDR400 DDR SDRAM, PC'99 Ready & PC'99 Colorful I/O Ports Design, Support USB Controller & PS/2 Mouse , Standard IR (infrared) Function, Provide extra " three-wire" fans connectors, Jumperless, Frequency Magic Setting, PC Health Monitoring On Post Screen, Magic Install, CPU Vcore Voltage minor adjustment, CPU ratio adjust by jumper setting, DDR DRAM Voltage2.5/2.6/2.7/2.8V ,System 3.3V,AGP 1.5V/1.6V Voltage Minor adjustable in bios, CPU overheat shut down protect function, 3-Phase Vcore Voltage to increase system stability, BIOS Write Protect function to avoid Virus crash data, BIOS Auto Detect CPU voltage, Y2K Compliant, ACPI Supporting For OS Directed Power Management

Processor: Athlon XP 2800+ Barton Core

Post 8

Jetway?. *shudders*

Post 9

Quote from Minorci:
Jetway?. *shudders*

What's wrong with Jetway?

Post 10

I havent been able to find a decent review about them, but i spose you get what you pay for.

Post 11

Rules of motherboard buying buy the big name brands - quite often release a lot more BIOS upgrades for any problems that occur. Better tech support and usually better manuals online and in paper.

It may state a lot of nice features but do they really deliver. Bit like the reason people buy a BMW over a Daewoo.

It should fit your case - unless it's a proprietry case like a Dell, Compaq, Hewlett Packard or brand name.

350W should be enough although the PSU may say 350W but can it really deliver the required power at higher drainage. Usually good brands like AOpen, Enermax, Antec, etc deal easy enough. Yum cha PSUs might be able to handle the load considering you're only using a 9100. The Athlon Winter Heater of the latest fashion doesn't seem to suck as much juice for heat.

On that you can setup XP's to run in a dual config although it's void your warranty so for you and your luck; possibly not the best choice considering us of the Uni kind seem to be drowning in money these days. Aswell being that you don't gain too much overall from going dually just yet not to mentoin modding XPs to run dual is just turning them to run as cheap MPs

9100 should be fine, just won't run the lovely AGP 8x.

Post 12

DONT BUY A KT400 Chipset!

Go nforce. your a fool if you buy a kt400 board :)

/me looks at kelly :)

ps thought you were happy with your celeron system wolf?

Post 13

Quote from Flammable:

ps thought you were happy with your celeron system wolf?
lol i think he got slapped to his sences :P

Post 14

Quote from Knight Of Nih:
[quote:9e6091d9b9="Flammable"]
ps thought you were happy with your celeron system wolf?
lol i think he got slapped to his sences :P[/quote:9e6091d9b9]

I repent! I REPENT FOR ALL MY TRESPASSES!

Nah. Basically, the story is this; Celerons are still, imho, the best Bang for your Buck processor out there on the market. Yet the simple fact remains; they are a low end system. I've never denied this. I have the money to get decent hardware, so I'm going to, and the Athlons rule the high end market. So thus I get Athlons.

I still feel like a traitor, however. Sniff. I suck.

Post 15

I feel my Durons are better on that end of the scale, probably because AMD folds faster than Intel gear though. :roll:

I like AMD gear for the price to performance value. However lately I'm getting closer to trying a Intel solution again - mainly because late nights seem to be caused by AMD heaters at my place replacing the Jumbos that fly overhead on the Melbourne Int Airport flightpath.

Post 16

Quote from Flammable:
DONT BUY A KT400 Chipset!

Go nforce. your a fool if you buy a kt400 board :)

Post 17

Quote from Jay:
I feel my Durons are better on that end of the scale, probably because AMD folds faster than Intel gear though. :roll:

I like AMD gear for the price to performance value. However lately I'm getting closer to trying a Intel solution again - mainly because late nights seem to be caused by AMD heaters at my place replacing the Jumbos that fly overhead on the Melbourne Int Airport flightpath.

jay is right duron have always been faster than the celerons. im not sure of the 1gig end of the market! (1gig celeron and 1gig duron)

Post 18

Durons have always owned the celerons. :P Durons are awsome if you want a cheap Comp :) and Athlons dont own the high end of the Market. :?

Post 19

Quote from HeReTiC:
Athlons dont own the high end of the Market. :?
With Intel recalling many 2800 and 3000 processors and Xeons being shit, AMD MP are the only alternative.

Post 20

why would you recall something that is faster ??

Post 21

Quote from Flammable:
why would you recall something that is faster ??
Firstly they're not.
Second, acording to Intel, they were having "anomalies" with them during tests. Intels own words, not mine.